for Nicopress sleeves from copper
Operating notes (excerpt):
• Grease crimping gauge before each crimping
• Follow correct sequence for partial crimping
• Never re-crimp a sleeve at the same spot
Detailed operating instructions supplied with the tool
Allocation Nicopress sleeve to cable and tool
| P/N sleeve | Cable Ø mm |
Crimping gauge | P/N tool |
| 217280 | 1.2 stainless steel | VB4 | 217221 |
| 217291 | 1.5 – 2.0 stainless steel | C | 217000, 217221, 217240 |
| 217281 | 1.5 – 2.0 | C | 217000, 217221, 217240 |
| 217282 | 2.4 – 2.6 | G | 217000, 217200, 217221, 217240 |
| 217283 | 3.0 – 3.2 | M | 217000, 217100, 217200 |
| 217284 | 4.0 – 4.2 | P | 217000, 217100, 217200 |
| 217286 | 4.6 – 5.0 | X | 217100 |
Nicopress Stop sleeves
For proper crimping of cable ends of control cables with a Nicopress tool. The stop sleeve prevents the cable end from uncoiling.
| P/N | Cable Ø mm |
Crimping gauge |
| 217371 | 1.5 – 2.0 | C |
| 217372 | 2.4 – 2.6 | G |
| 217373 | 3.0 – 3.2 | G |
Nicopress tool
Detailed operating instructions supplied with the tool
| P/N | Cable Ø mm |
Crimping gauge | Length mm | Handle/Lever mm |
Weight g |
| 217000 | 1.5 – 4.2 | C, G, M, P | 520 | 370 | 2530 |
| 217100 | 3.0 – 5.0 | M, P, X | 520 | 370 | 2530 |
| 217221 | 1.2 – 2.6 | VB4, C, G | 296 | 220 | 1000 |
| 217240 | 1.8 – 2.6 | C, G | 296 | 220 | 1000 |
| 217099 | Gauge and wrench for adjustment of Nicopress tool, gauge: C-G-M-P |
Tost Cable crimping tool
Compact, without long lever arms. Tool can be used in cramped spaces of the fuselage. The most economic alternative to Nicopress tools.
| P/N | Cable Ø mm |
Crimping gauge | Length mm | Handle mm | Weight g |
| 217200 | 2.4 – 4.2 | G, M, P | 280 | 160 | 390 |
